I've really enjoyed exploring the art of re-upholstering.
It's quite a process!
My first experience was, like most things, born out of necessity back in 2007. We had a comfy rust colored thrift store chair which I made a slipcover for to go in Luke's nursery. I decided to go ahead and recover the chair in a light muslin to go under a new slipcover for Julianne's nursery. You can see how it turned out here.It's quite a process!
Here are a few things I've learned from the two projects:
1. Supplies you will need: a camera, needlenose pliers, trash bin, a hammer and/or a rubber mallet, staple gun, good quality long staples made to handle wood and thick layers, cardboard and metal tacking strips, tacks, tack/staple remover, poly batting and foam, new upholstery fabric and trim.2. Take thorough pictures of the entire piece (before), and throughout the entire process. It is very important to take plenty of step-by-step pictures, this will serve as a roadmap for putting the piece back together.
3. Remove all the old staples (as much as possible). And be very careful, as there may be old and sharp parts.
4. As you remove fabric, you may want to mark pieces with numbers to indicate order and/or adjoining pieces. Set aside upholstery pieces, including piping or edging, to use as patterns to cut new fabric. This is also a useful way to determine exactly how much yardage you will need of new fabric. I estimated mine in both projects. You can do whichever you are more comfortable with.
5. Reuse as much of the "insides" as possible. As long as you are careful during dis-assembly, the metal tacking strip and piping core should be in good shape to reuse. If the foam is in poor condition, was of poor quality, or dust/odor is a concern, go ahead and replace. You can use batting and foam pieces to refresh old foam, or to add body or cushion for style and comfort.
6. After removing the exterior, this is a good point to sand down and refinish, replace or repair wood or legs. After refinishing the wood, I polished the brass pieces.
7. Use old fabric to cut new pieces, paying attention to special cuts, curves, stitch and/or snip marks, make sure to give yourself plenty of room for pieces that will need to wrap around to secure.
8. Sew together seams if needed, to join sections, make darts or attach piping.
9. Reassemble in the reverse order. Taking a few progress pictures.
10. This is the opportunity to add your own flair. You may choose to alter sewing channels, piping or edging, buttons and you may choose to add decorative tacks (as I did above) which will also reinforce the fabric.
Voila! Although the process is intense, the finished result is incredibly satisfying! There is nothing like saving an old piece and giving it a new life.








